Sony Support

Article ID : S500011338 / Last Modified : 11/04/2018Print

What to do when the starting time of Windows becomes longer if Windows automatic update is paused in Windows XP ?

    • When Windows Automatic Updates suddenly stops working, it will take longer time to start Windows.
    • When logging on Windows, it takes 2 to 10 minutes to start all the startup programs (Resident Software) and services.
    • The System Properties and Connection Properties cannot be opened until the system completes the startup of the resident.
    • When shutting down or restarting the computer, user will stay on the Saving the setting page for a long time or the computer stops responding.
    Take client's consulting contents for example.
    • In the Start menu, the computer stops responding when clicking Connect To.
    • Cannot open the Start menu.
    • The computer stops reponding at startup.
    1. Confirm whether Automatically download recommended updated for my computer and install them has been selected in the Automatic Updates under the System Properties page.

    2. Connect to the Internet.

    3. After finishing the preparation of downloading and installing the Automatic updates, if the message New updates are ready to install appears in the System Tray, please start to install the Automatic updates.

    4. When starting Automatic Updates, please disconnect the Internet and restart Windows.

       

    5. It takes longer time to start Windows.
      The following message has been recorded in the Event Viewer.

      Source ： Service Control Manager
      Type ： Error
      Event ID ： 7022
      User ： N/A
      Description ： Background Intelligent Transfer Service has no response when starting the computer.


    User can use the network device Unconnected Network to connect to the Internet when logging on Windows, and disconnect the Internet when updating the computer. If so, the next time user starts the computer, the Windows Update issue described above will be encountered.

    When this issue occurs, please refer to the steps below to troubleshoot it.

    ■ Solve the problem briefly
    ■ Solve the problem thoroughly


    Remark
    For detailed information about this problem, please refer to Microsoft Tech-Support.

    Article ID 314862
    Last Review May 14, 2007
    Subject Update Available for the Background Intelligent Transfer Service
    Link http://support.microsoft.com/kb/314862/en-us




    ■ Solve the problem briefly

    ● System Properties can be displayed
    ● Properties cannot be displayed


    ● System Properties can be displayed

    Please refer to the steps below to disable Windows Automatic Updates.
    1. Click Start→My Computer→Properties.

    2. On the System Properties, click the Automatic Updates tab.

    3. Check Turn off Automatic Updates.
      ※ If the above window doesn't appear, please dieselect Always update the computer to the latest version.

    4. Click OK.




    ● System Properties cannot be displayed

    Please restart the computer in Safe Mode to disable all the services related with Windows Automatic Updates.
    Please refer to the steps below.
    1. Restart the computer in Safe Mode.
      Please refer to the steps below.

    2. Click Start, and then click Control Panel.

    3. Click Performance and Maintenance.

    4. Click Administrative Tools.

    5. Double-click the Services icon.

    6. Double-click Background Intelligent Transfer Service in the right page.

    7. On the General tab, click Startup Type →Manual or Disabled.

    8. Click OK to close the dialog box Background Intelligent Transfer Service Properties.

    9. Close all the windows.


    ■ Solve the problem thoroughly
    Run Windows Update to update the system to the latest version.