Error: 03-01 is displayed when the camera turns off during standby mode or if there is no camera activity for a certain period of time.
If this error is displayed, you need to perform the connection operation on the camera. Perform the operation in accordance with the following procedure.NOTE:
- Wi-Fi may not be connected because of the software of the camera or the Live-View Remote not being in the latest version. Update the software of the device to the latest version.
- If the Action cam turns off before getting connected to a wireless network, set Auto Power Off function to Off.
Press the REC/ENTER button on the Live-View Remote while the error message is displayed. (The same procedure as selecting OK) The SSID of the camera is displayed.
NOTE: If the SSID cannot be displayed, turn the camera on again and place the camera and the Live-View Remote close to each other as much as possible. When you are using Action Cam, check the Wi-Fi icon is displayed on the top left of the screen.
When the screen below is displayed, promptly perform the connection operation on the camera.
Press and hold the shutter button.
DSC-QX30, ILCE-QX1, HDR-AZ1:
Press and hold the Wi-Fi button.
When ACPT? is displayed on the screen of the camera, press the REC/ENTER button of the camera.
If is displayed on the screen, select OK using the UP or DOWN button and press the REC/ENTER button.
If none of the above improve the problem, try the related Q&A coping process below.